Wax Printer Ribbon
Wax Printer Ribbon, due to the high content of wax in the ink composition, the weather resistance is poor (such as light, extremely cold, extremely hot, wind and rain, bacteria and other comprehensive damage, its tolerance is called weather resistance), not suitable for harsh environments. Use under. However, the print level is the lowest of the three ribbons (wax/mixed/resin based).
Wax Printer Ribbon
1. The product use environment
The sample state was adjusted in an environment of temperature (23 ± 5) ° C and relative humidity (50 ± 10)% for a period of not less than 8 h, and the test was carried out under the environmental conditions.
2. The print parameter settings
Install the ribbon and the substrate on the coder separately, set
Temperature: (100 ~ 200) ° C;
Printing pressure: (20 ~ 50) N;
Printing speed: (100 ~ 500) times / min;
According to the ribbon characteristics, select the appropriate parameters.
3. The printing medium used is as follows:
Applicable film: coated paper, PP, PE, PET, aluminum foil and various composite films.
4. Product storage conditions
The product should be stored in a dry, ventilated, non-acid, alkali and other corrosive materials, the temperature should be maintained at (-5 ~ 40) ° C, relative humidity is not higher than 85%. When the product is stacked, it should be placed on a flat floor or decking board in the direction indicated by the arrow on the carton, and the product should be kept in the original package state except for 1m away from the heat source. The stacking height should not exceed 1.2m.
Note: The above parameters are for reference only. Due to the type of printer and other factors, if the printing ribbon does not meet the requirements of your company, please adjust it to the best condition. If you have any problems, please contact us.