Home > Knowledge > Content
How to install and maintain the ribbon?
- Jul 23, 2018 -

In the process of using the ribbon, we should also pay attention to the installation, use time, proper maintenance, the specific methods and steps are as follows:

1.Before installing the ribbon, turning the gears few laps as the right direction. After loading the ribbon, then you need to turn a few laps again to confirm the ribbon to be OK. If the ribbon run normally,which is good begining of working .

2. Low-density ribbon is suitable for the 9-pin printer.Please do not use the thermal transfer ribbon in the 24-pin printer since the ribbon life will be shortened more.

3. Do not print continuously long time, so as not to affect the life of the printer and the ribbon as well.

4. The printhead should be regularly maintained,which should be removed and cleaned with 99% alcohol after using over one month. If printing color is not same and uneven,checking the printhead wear or not please .